Designation | Applications | Metallurgical Characteristics | Available Filler Metal Form | SDS | Tech Data |
Eureka 308 AWS 308L | Eureka 308 is for welding A.I.S.I. type 308, 309, and 316 stainless steels. They are also excellent for the repair of joining of furnace parts, bearing surfaces, billet hooks, forging tongs, zinc die casting dies, and drawing and forming dies. | Eureka 308 weld deposits are of the non-heat treatable austenitic stainless steel variety. This alloy resists scaling up to 1900 F. The deposits take high polish which creates an anti-frictional surface and will work harden rapidly up to 240 brinell when peened. The high Chromium and Nickel contents are extremely resistance to corrosive environments. | Solid MIG Wire, TIG Rods, and Micro Tig Rods | | |
Eureka 240 AWS 309 | Eureka 240 is for welding A.I.S.I. type 308, 309, and 316 stainless steels. They are also excellent for the repair of joining of furnace parts, bearing surfaces, billet hooks, forging tongs, zinc die casting dies, and drawing and forming dies. | Eureka 240 weld deposits are of the non-heat treatable austenitic stainless steel variety. This alloy resists scaling up to 1900 F. The deposits take high polish which creates an anti-frictional surface and will work harden rapidly up to 240 brinell when peened. The high Chromium and Nickel contents are extremely resistance to corrosive environments. | Solid MIG Wire and TIG Rods | | |
Eureka 310 AWS 310 | Eureka 310 is for welding A.I.S.I. type 309, 310, and 316 stainless steels. They are also excellent for the repair of joining of furnace parts, bearing surfaces, billet hooks, forging tongs, zinc die casting dies, and drawing and forming dies. | Eureka 310 weld deposits are of the non-heat treatable austenitic stainless steel variety. This alloy resists scaling up to 1900 F. The deposits take high polish which creates an anti-frictional surface and will work harden rapidly when peened. The high Chromium and Nickel contents are extremely resistance to corrosive environments. | Solid MIG Wire, TIG Rods, and Micro Tig Rods | | |
Eureka Ultra Tech 505 AWS 312 | Eureka Ultra Tech 505 is used for joining of all types of steels, tool steels, stainless steels, cast steels and any type of unknown steels. It has excellent strength, high impact resistance and high crack resistance. Eureka Ultra Tech 505 is a great general purpose maintenance alloy. It is often used as an underlay weld deposit. | Eureka Ultra Tech 505 has a duplex microstructure of delta ferrite in a matrix of austenite. The large quantity of delta ferrite induces a high level of ductility which enables crack free welds in highly constrained sections of virtually all types of iron base chemistries. The weld deposits have very high strength, work harden, and have good corrosion resistance. | Stick Electrode, Solid MIG Wire, TIG Rods, Metal Cored Wire, Flux Cored Wire, and Micro Tig Rods | | |
Eureka 316L AWS 316L | Eureka 316L is for welding A.I.S.I. type 304, 308, 309, 310, and 316 stainless steels. They are also excellent for the repair of joining of furnace parts, bearing surfaces, billet hooks, forging tongs, zinc die casting dies, and drawing and forming dies. | Eureka 316L weld deposits are of the non-heat treatable austenitic stainless steel variety. This alloy resists scaling up to 1900 F. The deposits take high polish which creates an anti-frictional surface and will work harden rapidly when peened. The high Chromium and Nickel contents are extremely resistance to corrosive environments. | Solid MIG Wire, TIG Rods, and Micro Tig Rods | | |
Eureka 330 AWS 330 | Eureka 330 is used for the welding of cast and wrought metals of similar chemical composition. It has good high temperature oxidation resistance, and high temperature creep strength up to 1800° F. It is used on boilers, baskets, furnace parts, and high temperature castings of similar chemistry. | Eureka 330 deposits exhibit good corrosion and oxidation resistance at extreme temperatures. The deposits have good high temperature strength and creep resistance qualities. | Stick Electrode, Solid MIG Wire, TIG Rods, and Micro Tig Rods | | |
Eureka 350 AWS 410NiMo | Eureka 350 is for the welding of 410 and 410NiMo castings and wrought metals. It is used in the repair, reclamation and joining of die casting dies, forging dies, arbors and shafts. It can be used as an underlay material in crack sensitive areas when a harder alloy is to be used as an overlay. Deposits polish to a high luster with a medium resistance to abrasion and are highly crack resistant due to its high tensile strength. | Eureka 350 is a low carbon martensitic stainless steel alloy. The as welded hardness is 35 – 40 HRC and is readily machinable. Eureka 350 weld deposits have a high tensile strength and are quite corrosion resistant. The weld deposits are ideally suited for heavy build ups in moderate wear conditions. The weld deposits flow very freely, producing extremely dense, crack, and porosity free weld deposits. | Stick Electrode, Solid MIG Wire, TIG Rods, Metal Cored Wire, Flux Cored Wire, and Micro Tig Rods | | |
Eureka 420 AWS 420 | Eureka 420 is for the welding of 410 and 410NiMo and 420 castings and wrought metals. It is used in the repair, reclamation and joining of die casting dies, forging dies, arbors and shafts. It can be used as an underlay material in crack sensitive areas when a harder alloy is to be used as an overlay. Deposits polish to a high luster with a medium resistance to abrasion and are highly crack resistant due to its high tensile strength. | Eureka 420 is a martensitic stainless steel alloy. The as welded hardness is 50-55 HRC. Eureka 420 weld deposits have a high tensile strength and are quite corrosion resistant. The weld deposits are ideally suited for heavy build ups in moderate wear conditions. The weld deposits flow very freely, producing extremely dense, crack, and porosity free weld deposits. | Solid MIG Wire, TIG Rods, and Micro Tig Rods | | |
Eureka 2209 AWS 2209 | Eureka 2209 is for welding of 22% Chromium duplex stainless steels such as UNS S31803 and S32205. The deposits have good resistance to stress corrosion cracking, especially in environments containing H2S. | Eureka 2209 weld deposits are of the non-heat treatable austenitic stainless steel variety. This alloy resists scaling up to 1900 F. The deposits take high polish which creates an anti-frictional surface and will work harden rapidly when peened. The high Chromium and Nickel contents are extremely resistance to corrosive environments. | Solid MIG Wire and TIG Rods | | |
Eureka 17-4 PH AWS 630 | Eureka 17-4 PH is for the welding of ASTM A564,
17-4 PH and 15-5 PH martensitic precipitation hardening stainless steels. The deposits have good resistance to stress corrosion cracking, especially in environments containing H2S. It can also be used in plastic injection molds.
| Eureka 17-4 PH weld deposits are an age hardening stainless steel. This alloy resists scaling at elevated temperatures. The deposits take high polish which creates an anti-frictional surface. It is used in the petrochemical and aerospace industries. Also used as a mold steel in the plastic industry. | Solid MIG Wire, TIG Rods, and Micro Tig Rods | | |
Eureka Mang AWS FeMn-A | Eureka Mang Electrodes are used in the buildup or joining of austenitic work hardening Manganese steels. The weld deposits are extremely resistant to high impact loads and severe abrasion. It is commonly used for the repair of railroad frogs, crushers, and shovel buckets. | Eureka Mang Electrodes deposits are high in Manganese with additions of Carbon, Chromium, and Nickel. The deposits have an austenitic structure that is 20 HRC as deposited. The deposits work harden rapidly up to 50 HRC. | Stick Electrode | | |
Eureka Wearmax | Eureka Wearmax Electrode is a chromium carbide alloy which maintains outstanding abrasion resistance up to 1200 F. Its microstructure displays massive amounts of carbide. The deposits will stress relieve themselves in the form of cracks. The weld deposits are not machinable and cannot be flame cut. It is used on the following applications: coke handling equipment, sinter plant clod crushers, slag handling equipment, pug mill paddles, hot mill guides, iron ore wear plates, high speed fans and coke crushers. | Eureka Wearmax Electrode gives ultimate hardness with single pass deposits. Hardness range between 55 – 60 HRC. The resultant deposit will produce a high Chromium Carbide Matrix. | Stick Electrode | | |
